Support Articles

6-1-6. Replacing the Tube Pump Tubes of the Maintenance Unit (1) Turn off GT-541 (2) Remove the Rear Cover     (See "7-1. Removing the Covers" for details.) (3) Disconnect the Pump TUbe on the top left of the Tube Pump connected with the Drain Plug. (4) Pull out the L-shaped...

6-1-12. Replacing the Cap Rubbers (1) Make sure GT-541 is not in middle of any operation.  (2) Press the OK Button on the Control Panel to open the Menu Display. (3) Press the Up/Down Button to select "Maintenance", and then press the OK Button. (4) Press the Up/Down Button to...

There are many reasons why one day you could be getting great white prints and the next it starts fading or banding or not coming out at all. It would be a mistake to jump the gun and assume it's a clog. Many time there is a pressure issue. Either...

To remove the print head on your Epson F2000 and F2100,  Remove the damper unit (4 screws on either side)Remove the black clip on the rightPull damper unit out and disconnect the ribbons  Now you will see the head which is held by 3 screws One is obvious and the...

Watch this video to learn how to open up your existing Brother GT 361 381 ink cartridge and replace it with our GPI Replacement ink bag.

Imaging Solutions for Direct To Garment Printing to Save Money and Improve Quality iProof's DTG RIPPRO v06 for the Epson SureColor F2000 A versatile RIP offering features not found in Garment Creator or other RIPs. RIPPRO reduces ink costs up to 50% offering more white ink control than other RIPs...

There are many reasons you may get the "white screen of death" on your Anajet mPower printer, however it is often when attempting to flash the firmware or after sending hundreds to thousands of designs to your printer to print. It's really important to actually Format the SD card rather...

Changing an Ink Cartridge The ink indicator on the Display flashes when the Ink Cartridge is getting low. Prepare the new Ink Cartridge (option*), and replace it when “Empty XXXX (color)” is displayed.  Make sure to replace the Ink Cartridge indicated on the display.  Be careful not to...

Adjusting the Platen Height Under the Platen 1 Platen Fixing Lever Fixes the Platen Tighten/Loosen this lever to install/uninstall the Platen and to adjust the Platen height. Move the Platen Height Adjustment Lever(2) to the A position in the right image and loosen the Platen Fixing Lever (1). When you...

Print Head Firing Adjustment (CMYK) 1. Click on PC start button. Select programs or all programs. 2. Select the Brother GT-3 Tools and click on GT- Maintenance. 3. Select the correct GT model #. Under the GT-3 Maintenance menu, select "firing adjustment" then click next. 4. Select 1200x 1200dpi color...

Install Print Heads 1. Remove the print heads from the box in the accessory kit. 2. Prepare an anti-static wristband, and ground yourself by attaching the end to the machine (metal portion). 3. Turn on the GT-3. 4. On the control panel, press the Up/Down Button and select maintenance, press...

Installation of the Flushing Plate, Sponge and Felt 1. View the parts a)Flushing Plate b)Flushing Felt c) Flushing Sponge   2. Installation of the pieces, Insert the felt into the flushing plate. 3. Install the assembled flushing plate into the machine. Note: Make sure to wear gloves.

Install the Waste Tank 1. Remove the waste tank from the accessory kit. 2. Place the waste tank in the holder on the GT stand. 3. Place the waste tube in the tank, (remember to cut the tube in accordance with the tank). 4. Make sure there are no kinks...

Confirm Nozzle Check Pattern CMYK 1. Make sure the platen height is set to the “A” position. 2. Place a piece of paper in the right-hand corner of the platen making sure it is flat (not curled) on the platen. 3. Scroll down on the panel and locate test print,...