Support Articles

Learn how to fill your DTG M2 or M4 Garment printer with ink.  There are many inks on the market, take a look and Buy Ink for the DTG M2 Garment Printer Here!  

Learn how to adjust the platens on the DTG M2 and M4 so you can get the best print possible. Buy Parts for the DTG M2 and M4 Printers here!

Power up that DTG M2 or M4 and get started printing and making money Buy Ink for the DTG M2 Garment Printer Here!

Buy Ink for the DTG M2 Garment Printer Here!

Get parts for the DTG M2 here Buy Ink for the DTG M2 here Click here to download the tutorial to learn more about how to operate the DTG M2 Garment Printer

Buy the capping station for the DTG M2 and M4 Garment Printer Here! Buy parts for the DTG M2 and M4 Garment Printer Here! 5.2.3 Removing the Pump/ Cap Assembly Switch the Printer OFF. Carry out the head park procedure. Remove the allen screw as shown then remove the CR...

Buy B-Series Ink for the Brother GT-3 Series Garment Printer Here! Buy Parts for Brother Garment Printers Here! The B-SERIES inks are designed to replace the OEM ink set for the Brother GT3 Direct To Garment printer. These inks are designed with high performance capabilities, 35 second white ink cure...

 Flushing the M2 Capping Station: Buy the capping station for the DTG M2 and M4 Garment Printer Here! Buy parts for the DTG M2 and M4 Garment Printer Here! In the waste compartment above the waste jug, there is a gutter that catches waste ink from the capping station pump...

M2 HOOD REMOVAL: Buy parts for the DTG M2 and M4 Garment Printer Here! Removal of Covers Before replacing some service parts in the machine, some external covers must be removed. This section describes the procedures to remove covers if required.   Removing the Top Cover   Open the top...

M2 DEFAULT SETTINGS: Buy parts for the DTG M2 and M4 Garment Printer Here! 3.5.4 Confirming Default Settings This section gives an overview of the Setup Menu and the M series default settings. There are some critical M series default settings that ensure that the printer operates in accordance with...

Buy parts for the DTG M2 and M4 Garment Printer Here! 7.1 Introduction This chapter provides information on the maintenance mode2. The maintenance mode2 provides the user with functions of displaying and initializing the life counters. It is used in the manufacturing process, adjustment, and maintenance. The maintenance mode2 is...

Buy parts for the DTG M2 and M4 Garment Printer Here! Release carriage from capping station, and slide it over to the middle of print area You will see 2 “sponges” one is the capping station, and the other is the Flush Tray Assembly. (Indicated below 1-A) Remove Flushing Tray...

Buy the Printhead Cable for the DTG M2 and M4 Garment Printer Here! Release carriage from capping station and roll out to the middle of the printer. (Indicated below 1-A) Place a rag under the area you are working on. Just to catch any ink that might be dropped during...

IMAGE ARMOR F-SERIES CONVERSION INSTRUCTIONS AND MAINTENANCE INFORMATION The F-SERIES inks are designed to replace the OEM ink set for the Epson F-2000 Direct To Garment printer. These inks are designed with high performance capabilities, 35 second white ink cure time with as close a match to the original OEM...

Learn how to repair/replace the capping station on the DTG M2 / M4 Garment Printer