Support ArticlesDTG

Replacing the print head on your Omniprint FreeJet is a relatively easy process and should only take around 20-30 minutes to complete. You will want to place some paper towels or old t-Shirts below the Print Carriage in case any ink drips during the process. You will need the Damper...

Learn how to change the print head on your DTG Viper 2   Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Buy Light Shirt Pretreatment for DTG Viper 2 Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Find the pretreatment you need for all shirts    Take a look at the Pearl PTM Pretreatment Machine  Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Find the pretreatment you need for all shirts     Take a look at the Pearl PTM Pretreatment Machine Buy ink for your DTG Viper 2 here Buy parts for your DTG Viper 2 here

Buy Cleaning Solution and cleaning supplies like swabs and wipes for cleaning your DTG Buy your DTG Viper 2 Parts Here Buy DuPont ink for your DTG Viper 2

A. Perform a “Nozzle Check”, preferably on a transparency (available at your local office supply stores), so you can see your colors as well as the white inks. 1. This ensures that the print head is fully primed and ready to print 2. Place the transparency, oriented in landscape, so...

  A. Agitate the white inks by holding the cartridge upright (vertical), then turn the cartridge over, so the lower end is now at the top. Then turn back upright. 1. Only shake the inks if they have not been agitated in a while. Shake the white inks vigorously if...

Buy your DTG Viper 2 Parts Here

If your head cables on your FreeJet look like this, they need to be replaced.   Move the Print Head Carriage all the way over to the left side of the printer to create slack.   Push the tab to the left to release the ribbon cable guide. Once released move the...